Page Contents
What You’ll Need
Hanging a wreath on a door with a command hook is a great way to decorate for the holidays or seasons without damaging your door. To do this simple holiday craft, you’ll need just a few supplies:
– Wreath – You can purchase a pre-made wreath or make your own using fresh or faux foliage. The size will depend on your door, but generally 15-25 inches will work well.
– Command hook – This type of hook uses damage-free adhesive strips to hang decor on surfaces like doors and walls. You’ll want the large/heavy duty size designed to hold around 5 pounds.
– Scissors or wire cutters – To trim the hook if needed.
Choosing the Right Location
When picking the spot to hang your wreath, consider these factors:
– Height – For a standard entry door, hanging the wreath at eye level creates nice symmetry. Use a step stool if needed.
– Weight distribution – If your wreath is very full or heavy, aim to place the hook an inch or two above the door handle. This balances the weight instead of letting it pull down on one side.
– Accessibility – Make sure the spot you choose is easy to reach. You’ll need to be able to comfortably press the wreath onto the adhesive hooks.
– Visibility – Centering the wreath so it’s one of the first things people see when they approach your home gives maximum impact.
Preparing the Wreath
Before hanging your wreath, you may need to:
– Fluff and shape the wreath materials so they look full.
– Trim off any excess length on the hanging loop so it’s not visible above the wreath after hanging.
– For fresh wreaths, spritz foliage with water to prevent drying out.
– If needed, attach a hanging loop using florist wire or string. Wrap and secure it around the wreath tight enough to hold the weight.
Putting Up the Command Hook
Follow these steps to install the command hook on your door:
– Wipe down the door area where you plan to adhere the hook to remove any dirt and oils.
– Separate the adhesive strips on the back of the hook. Remove the white liner pieces to expose the sticky surfaces.
– Firmly press the largest adhesive strip flat onto the door for 30 seconds. Smoothing down the entire strip ensures maximum hold.
– For especially heavy wreaths, also attach the smaller bottom adhesive strip. This helps bear the weight.
– Check that the hook is securely affixed. It should hold fast when you try to wiggle it off.
Hanging the Decor
You’re now ready to complete your door wreath display:
– Hold the top of the wreath up to the hook, centering it at your desired display location.
– Let the wreath hang freely on the hook, pressing the hanging loop onto the adhesive. Apply steady pressure for 30 seconds to adhere.
– For very heavy wreaths, attaching some floral wire or ribbon from the bottom of the wreath up to the hook provides extra support.
– Fluff and adjust the wreath as needed, twisting greens or ribbons to get the look you want.
– Go back and apply pressure anywhere the wreath feels loose or tilted on the hook. This ensures a secure hold.
– Check your work from a distance. Adjust the wreath if needed so it sits level and looks full.
Maintaining Your Hanging Wreath
With the right care, your door wreath should last all season long:
– For fresh wreaths, mist occasionally with water to prevent drying out. Small spritzes every few days should suffice.
– Fluff and reshape the wreath as needed if foliage starts to droop or get crushed.
– Check the command hook adhesion each week or after high winds. Reapply pressure to restore the bond if needed.
– For light wreaths, the command hooks will hold securely through months of normal use. Heavier wreaths may require replacing the strips every 4-6 weeks.
– When it’s time to take the wreath down, gently pull straight out from the wall. Go slowly to prevent surface damage.
Troubleshooting Tips
If you’re having issues getting your wreath to hang securely, try these tips:
– Wipe down the door surface thoroughly to remove any residue or oils that prevent adhesion.
– For heavy wreaths, use two command strips close together at the top of the hook for added support.
– Try a different spot on the door in case your original location was somehow compromised. Avoid hanging over cracked or peeling paint.
– If hooks keep popping off, switch to industrial strength command strips. Clean the door and wreath loop well so the fresh adhesive bonds tightly.
– For metal or vinyl doors, use command hooks made specifically for low-surface-energy surfaces. The special adhesive grips better.
– Add a ribbon hanging down from the bottom of the wreath that you can secure under the door. This helps take weight off the hook.
Wreath Hanging Tips
Follow these tips for gorgeous door wreath displays:
– Incorporate greenery and embellishments that reflect the season or holiday, like pinecones, berries, and ornament accents.
– Make your own DIY wreath using fresh foliage from your yard or inexpensive finds from a craft store.
– Stick to lighter weight wreath materials if your door surface is prone to chipping or peeling paint when removing adhesive.
– Change up your wreath monthly or seasonally. The easy install and removal lets you decorate often.
– Coordinate wreath colors and textures with other exterior décor like potted plants, yard flags, or outdoor rug.
– For interior doors like the entryway from a garage, make sure any fresh materials you use are safe for indoor use.
– Display small coordinated wreaths on your front and back doors or mix up sizes for visual interest.
– Nestle battery operated string lights into your wreath for a festive glow during evening hours. Use mini lights designed for outdoor use.
Advantages of Command Hook Wreaths
Hanging wreaths with command hooks offers these benefits:
– No tools or hardware needed – Just press on the self-adhesive strips, allowing even renters to decorate.
– Adjustable and reusable – The hooks can be removed and repositioned multiple times without surface damage.
– Secure hold – When installed properly, the hooks can hold heavy wreaths through all kinds of weather and use.
– Variety of options – Command hooks come in many sizes and designs to accommodate any wreath and door type.
– Damage-free – The strips are designed to come off cleanly without harming paint or wood surfaces.
– Easy to level – Simply press and lift edges of the hook until the wreath hangs evenly.
Compared to nails or other hardware, command hooks are ideal for quickly installing wreaths in a rental-friendly, non-permanent way. The adjustable hooks allow you to easily swap out wreaths for different seasons or holidays whenever you like. With a few simple steps, you can display a festive wreath without worrying about wall damage or home alterations.
Alternative Wreath Hanging Methods
While command hooks offer a convenient damage-free option, wreaths can also be hung using:
Nails or screws
Nails or screws allow hanging heavier wreaths but require patching holes when removing. Use screw eyes or cup hooks to make wreath removal easier.
Over-the-door hooks
Plastic over-the-door hooks conveniently hang wreaths without damaging the door. However, visibility is limited to the door edges.
Ribbon or wire
Wrapping ribbon around the top of the door provides a quick way to hang lightweight wreaths. For heavier ones, wire pinned into the door frame works better.
Suction cups
Suction-cupped hooks adhere to smooth surfaces like glass doors without damaging them. But they may not provide a strong enough hold for heavy wreaths.
Mantle clips
Mantle mount clips that fit over mantels or ledges offer another option for hanging holiday wreaths inside.
Conclusion
With the right supplies and techniques, it’s quick and easy to hang a decorative wreath on your door using a command hook. Their damage-free adhesive and secure hold allow even heavy wreaths to be displayed with minimal installation needed. So adorn your entryway with lovely seasonal wreaths to welcome guests and add charm to your home’s exterior. The simple yet effective command hook system lets you easily switch out designs as the seasons change.
